您好,欢迎光临山东银叶环保科技有限公司官方网站!

工业车间除尘设备的选择应该考量哪些?

来源:http://www.yinyehuanbao.com     发布时间:2020-12-07   浏览次数:

1.选择工业车间除尘设备呢要先了解车间粉尘的分散程度。
1. To select dust removal equipment in industrial workshop, it is necessary to understand the dispersion degree of workshop dust.
车间内粉尘的分散程度对工业除尘设备的使用有很大影响。不同条件下的灰尘分散程度也有很大的不同。所以在车间选择工业除尘设备时,应掌握粉尘的分散度。
The dispersion degree of dust in workshop has great influence on the use of industrial dust removal equipment. The degree of dust dispersion varies greatly under different conditions. Therefore, when selecting industrial dust removal equipment in the workshop, the dispersion of dust should be mastered.
2.选择工业车间除尘设备时要了解灰尘颗粒的大小
2. The size of dust particles should be known when selecting dust removal equipment in industrial workshop
粉尘的粒径对除尘设备的除尘效果影响很大,更明显的影响是粉尘的重力、惯性力和离心力。因而工业除尘设备一般分为三类除尘:重力除尘器、惯性除尘器和旋风除尘器。
The particle size of dust has great influence on the dust removal effect of dust removal equipment, and the most obvious influence is the gravity, inertial force and centrifugal force of dust. Therefore, industrial dust removal equipment is generally divided into three types: gravity dust collector, inertia dust collector and cyclone dust collector.
3.选择工业车间除尘设备时对粉尘浓度的考虑
3. Consideration of dust concentration when selecting dust removal equipment in industrial workshop
车间除尘设备
初始粉尘浓度越低,对粉尘过滤工业除尘设备中车间粉尘的整体除尘效果越好。当初始粉尘浓度较高时,除尘设备生产厂家会设计一种压力损失变化较小的连续除尘方法。
The lower the initial dust concentration, the better the overall dust removal effect of workshop dust in dust filtering industrial dust removal equipment. When the initial dust concentration is high, the dust removal equipment manufacturer will design a continuous dust removal method with small pressure loss change.
4、根据工况合理选择工业除尘设备
4. Reasonable selection of industrial dust removal equipment according to working conditions
工业除尘设备的选择要求首先了解灰尘的成分和灰尘的操作条件。不同的场景可以使用不同的工业除尘设备。目前市面上常用的工业除尘设备有滤筒除尘器、旋风除尘、布袋除尘、湿式除尘器等多种除尘处理方法。
The selection of industrial dust removal equipment requires first to understand the composition of dust and dust operating conditions. Different industrial dust removal equipment can be used in different scenarios. At present, the commonly used industrial dust removal equipment on the market includes filter drum dust collector, cyclone dust collector, bag dust collector, wet dust collector and so on.
滤筒除尘器不仅净化效率高、能耗还低,除尘方便且无二次污染。其捕集效率也较高,一次性投入低、简单的运行管理。
The cartridge filter not only has the advantages of high purification efficiency, low energy consumption, convenient dedusting and no secondary pollution. Its capture efficiency is also high, one-time investment is low, simple operation and management.
旋风除尘一般适用于粉尘颗粒大、比例大的粉尘处理。一次性投入低,简单的操作管理,除尘使用中更为方便。
Cyclone dust removal is generally suitable for dust treatment with large particles and large proportion. Low one-time investment, simple operation and management, dust removal is more convenient in use.
袋式除尘器净化效率高,投资成本和运行成本适中。
The bag filter has high purification efficiency, moderate investment cost and operation cost.
以上是小编分享的车间除尘设备,你还见过哪些新颖有趣的知识吗?,欢迎在点击网站的链接http://www.yinyehuanbao.com,在留言中写下你要表达的内容.
The above is the workshop dust removal equipment shared by Xiaobian. What new and interesting knowledge have you seen? , welcome to click on the website link http://www.yinyehuanbao.com Write down what you want to say in the message

上一篇:工业除尘设备我们常用的有哪些?
下一篇:高浓度VOC废气处理设备选择应该注意哪些?