您好,欢迎光临山东银叶环保科技有限公司官方网站!

焊接烟尘净化器收集的粉尘的种类有哪些?

来源:http://www.yinyehuanbao.com     发布时间:2020-09-10   浏览次数:

焊接烟尘净化器主要收集净化的烟尘是焊接烟尘,对焊烟的处理效率在90%以上,但切割、打磨工序产生的烟尘也可以用来净化处理,因为焊接烟尘净化器主要的过滤部件滤筒对超细粉尘具有很高的净化效率,对烟尘体积相似的打磨切割烟尘来说同样具有过滤效果。
The welding fume purifier mainly collects and purifies the welding fume, and the treatment efficiency of the welding fume is more than 90%. However, the smoke and dust generated in the cutting and grinding processes can also be used for purification, because the filter cartridge, the main filtering component of the welding fume purifier, has high purification efficiency for ultra-fine dust, and also has filtering effect for grinding and cutting fume with similar smoke volume.
不过虽同样可以被滤筒处理,但因为打磨、切割和焊接的工作场景、工件大小以及作业特点差别很大,焊接烟尘净化的烟尘收集装置并不能对打磨与切割起到很好的收集效果,所以这两种工序更好使用的除尘设备。
However, although it can also be treated by the filter cartridge, due to the great differences in the working scenes, workpiece sizes and operation characteristics of grinding, cutting and welding, the dust collection device for welding fume purification can not achieve a good collection effect for grinding and cutting, so the best use of professional dust removal equipment for these two processes.
打磨除尘可以使用打磨除尘台,工作时将打磨工件放在除尘台上,除尘台上有吸风口可以对产生的打磨烟尘进行效率的收集,收集的烟尘会被除尘台下方的滤筒过滤,这样既方便打磨工作又能提高工作效率;打磨除尘台巧妙的将工作台面和除尘器结合在一起,有效的节省了工作空间,加上打磨除尘台所有电气元件密封安装并配备防爆灯,安全有保证。
车间除尘设备
Grinding dust removal platform can be used for grinding and dust removal. When working, the grinding workpiece is placed on the dust removal table. There is an air suction outlet on the dust removal platform, which can collect the grinding dust with maximum efficiency. The collected dust will be filtered by the filter cylinder under the dust removal platform, which is convenient for grinding and can improve the work efficiency. The grinding dust removal table skillfully combines the working table with the dust collector, It can effectively save the working space, and all the electrical components of the grinding and dust removal table are sealed and installed, and equipped with explosion-proof lamps, so the safety is guaranteed.
切割烟尘更有效的除尘方式便是使用吹吸式切割机烟尘净化除尘系统,在切割机床的一侧设置吸风口,一侧设置吹风口,和切割机割头保持一线;在切割台面下方同样有吸风口,这样切割产生的烟尘就会从两个方向被吸入除尘系统中,有效烟尘收集率在90%以上,烟尘处理效果非常明显。
The most effective dust removal method for cutting dust is to use the dust purification and dust removal system of the blowing and suction cutting machine. The air suction outlet is set on one side of the cutting machine tool, and the air outlet is set on the other side to keep a line with the cutting head of the cutting machine; there is also an air suction outlet under the cutting table, so that the smoke and dust generated by cutting will be sucked into the dust removal system from two directions, and the effective dust collection rate is above 90% The effect of dust treatment is very obvious.
针对三种不同工序烟尘处理的上述三种除尘设备,都是现在环保部门要求车间除尘必备的除尘产品,在检测上都可以达到相关检查标准。有鉴于不同工作特点对烟尘收集带来的难度挑战,为了保证除尘效果,工厂需要按照自身使用特点向生产商定制需要的除尘设备。
The above three kinds of dust removal equipment for three different processes of dust treatment are all necessary dust removal products required by the environmental protection department for workshop dust removal, and can meet the relevant inspection standards in the detection. In view of the difficulties and challenges brought by different working characteristics to dust collection, in order to ensure the dust removal effect, the factory needs to customize the dust removal equipment according to its own use characteristics.

上一篇:工业吸尘器的种类有哪些?
下一篇:催化燃烧设备作业燃烧与扭转的状况概述